What a rotating car seat is
On a rotating car seat the seat sits on a base that turns. The base is fixed in the car and stays put, while the seat can be turned rear-facing, forward-facing or sideways towards the open door — to put the child in. Hence the “360°” in the name: the seat turns full circle.
Velano has two such models — the Vento 360° and the Aura 360°. Both meet the i-Size standard (UN R129) and are designed for children from 40 to 150 cm tall — from the first journey home from hospital up to the height at which Ukraine's Road Traffic Rules no longer require a child seat.
Three seat positions and what each is for
- Rear-facing — for the youngest, 40–105 cm. The child travels with their back to the direction of travel, so under hard braking the whole seat back supports the head, neck and spine. We explain why this matters in our article on the i-Size standard.
- Forward-facing — once the child has grown. Both manuals allow this position only from 76 cm and not before 15 months.
- Sideways to the door (turned 90° or 270°) — only to put the child in, buckle them up or lift them out. The Vento manual is clear: this position is for when the car is stationary. Before setting off, the seat is turned rear-facing or forward-facing and locks in place.
Advantages of a rotating seat
- Easier to put the child in and buckle up. No leaning deep into the car and lowering the child in from the side: the seat turns towards you, with the buckle and harness right in front of you. That makes it easier to tighten the harness properly — so that no more than one finger, about 1 cm, fits between the harness and the child's body, as the Aura manual requires.
- Rear-facing doesn't become a chore. Putting a child into an ordinary seat fitted rear-facing is awkward. In a rotating seat it is equally easy in any position, so the child can stay rear-facing for as long as the seat allows: in the Vento and Aura, up to 105 cm.
- One seat for years. 40–150 cm means three stages in one seat: rear-facing with a 5-point harness, forward-facing with the seat's harness (76–105 cm) and booster mode with the car's own seat belt (100–150 cm). No need to buy an infant carrier, then a seat, then a booster.
Drawbacks worth knowing in advance
- Weight. The Vento 360° weighs 11 kg and the Aura 360° about 10 kg. Moving such a seat between cars every day is hard work, so a rotating seat usually stays in one car for the long term.
- ISOFIX is needed for a baby. In the 40–105 cm positions both models are installed on ISOFIX only: the Vento with a support leg, the Aura with a Top Tether strap. With the car's seat belt alone, without ISOFIX, only booster mode for 100–150 cm can be secured. How to check whether your car has ISOFIX is covered in our article on ISOFIX.
- Requirements for the seat position. The Vento's support leg has to rest on the car floor (its length adjusts, with 21 positions), and the Aura needs a Top Tether anchor point in the car — your vehicle handbook will show where it is.
- Price. The rotating mechanism is extra engineering, so such seats usually cost more than models without rotation.
How to use the rotation correctly
- Unlock the rotation: on the Vento, pull the rotation handle on the base outwards; on the Aura, pull the rotation button.
- Turn the seat towards the open door, sit the child in and fasten the 5-point harness. The buckle clicks shut, and on the Vento it also turns green.
- Tighten the harness as firmly as possible without making the child uncomfortable. The shoulder straps should be level with the child's shoulders or slightly above — adjust the headrest height for this.
- Turn the seat to the travel position — rear-facing or forward-facing — and make sure the rotation mechanism has locked.
- Check the indicators: the ISOFIX connectors show green; on the Vento, the support leg indicator is green; on the Aura, the Top Tether indicator.
The full sequence is in the text versions of the Vento 360° and Aura 360° manuals on our site, with links to the illustrations in the PDF.
Vento 360° or Aura 360°: the differences
| Vento 360° | Aura 360° | |
|---|---|---|
| Child's height | 40–150 cm | 40–150 cm |
| Installation at 40–105 cm | ISOFIX + support leg | ISOFIX + Top Tether |
| Booster mode, 100–150 cm | seat belt, or belt + ISOFIX | seat belt, or belt + ISOFIX |
| Newborn insert | for 40–60 cm | for 40–75 cm |
| Recline | 4 positions | 5 positions |
| Headrest | 13 positions | height-adjustable |
| Seat weight | 11 kg | about 10 kg |
Put simply: the Vento is held by ISOFIX and a support leg that rests on the floor, and has a 13-position headrest. The Aura uses a Top Tether strap instead of a support leg, has an insert that lasts longer — up to 75 cm — and is more affordable. Before choosing, check what your car has: both models need ISOFIX points, and the Aura also needs a Top Tether anchor.
Can a rotating seat go in the front?
Under Ukraine's Road Traffic Rules (clause 21.13), child seats are installed in any row except the front one. The exception is a child under three in a passenger car: they may travel in the front only in a rear-facing seat and with the frontal airbag deactivated. The Vento and Aura manuals also forbid fitting the seat on a seat with an active frontal airbag. The safest place is the back seat; the rules are covered in detail in our article on child car seat rules.
In short
A rotating car seat means everyday convenience and long rear-facing travel: the child is easy to put in and buckle up properly, and one seat lasts from hospital to 150 cm. On the other hand, it is heavy, needs ISOFIX for a baby and costs more. If your car has ISOFIX and you want one seat for years, have a look at the Velano Vento 360° and Velano Aura 360°; other models are in our car seat catalogue.


