p. 1 in the PDF ↗

Manual Instruction

-Rearward Facing
From birth up to approx. 4 years
From 40 to 105 cm

-Forward Facing
From 3 to 10 years
From 76 to 150 cm

p. 3 in the PDF ↗

1. Important Information

1.1 Suitability

This child restraint system is suitable for children from 40 up to 150 cm. (from birth to approx. 12 years).
ISOFIX attachment for the connection between child car seat and vehicle seats having two rigid anchorages according to UN ECE Regulation No.14/01.
This child restraint is suitable for use in the vehicles fitted with 3-point vehicle belt approved to UN ECE Regulation No. 16 or other equivalent standards.

1.2 Approval

This child restraint system has been approved in accordance with UN ECE Regulation R129/03,and is suitable for general use in vehicles and is compatible with the majority of vehicle seats.

40-105CM Installation Rearward Facing with ISOFIX & TOP TETHER

This child restraint is classified as "Integral Universal ISOFIX Enhanced Child Restraint Systems (i-Size)"use and It will fit vehicles with positions approved as ISOFIX positions(as detailed in the vehicle handbook). If in doubt, please consult either the child restraint manufacturer or the retailer. The size range for which this device is intended is : From 40 up to 105 CM.

76-105CM Installation Forward Facing with ISOFIX & TOP TETHER

This is an "Integral Universal ISOFIX Enhanced Child Restraint Systems (i-Size)", It is approved To UN ECE Regulation R129 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems. It will fit vehicles with positions approved as ISOFIX positions (as detailed in the vehicle handbook), depending on the category of the child car seat and of the fixture. The size range and for which this device is intended are: From 76 up to 105CM.

100-150CM Installation Forward Facing with two options:

  1. with 3-point vehicle belt
  2. with 3-point vehicle belt & ISOFIX
p. 4 in the PDF ↗

This child restraint is classified as "Non-integral Universal Enhanced Child Restraint Systems (i-Size booster seat)"use and is suitable for vehice i-size seating position.
This child restraint is suitable for use in the vehicles fitted with 3- point vehicle belt approved to UN ECE Regulation No. 16 or other equivalent standards. If in doubt, please consult either the child restraint manufacturer or the retailer.

This Child Restraint is classified for i-Size(40-105cm) and i-SIze booster seat (100-150cm) use and is suitable for fixing into the seat positions of the following cars:

CARFRONTREAR
OuterOuterCentre
(Model)No(rearward)YesYesNo

Seat positions in other cars may also be suitable to accept this child restraint.
If in doubt, please consult either the child restraint manufacturer or the retailer.

WARNING:

  • Please read the entire instruction manual thoroughly before using the child car seat. Improper installation can endanger the life of your child.
  • Under no circumstances should the seat be installed on a passenger seat equipped with an airbag. This can be very dangerous.
  • It is most important that the seat belt is correctly routed.
  • Never make unauthorized alterations or additions to the product.
  • Never use the child car seat if it has been in an accident, or if it been subjected to violent stresses
  • Do not leave your children in the seat unattended at any time.
  • Child car seat parts may become hot in direct sunlight. Cover with a sheet to prevent this.
  • Make sure that your child never plays with the buckle as the buckle is not fully
  • Ensure that all other passengers. luggage and loose objects are properly secured.
  • Never use the child car seat without cover. Only covers approved by manufacturer can be used.
p. 5 in the PDF ↗

The child car seat must be secured with the car seat belt when not in use. In an emergency your child can be released quickly by pressing the red button on.

The rigid items and plastic parts of the child seat shall be located and installed so that they are not liable to become trapped by a movable seat or in a door of the vehicle during everyday use of the vehicle.

Never replaced with any other than the one recommended by the manufacturer, because the cover constitutes an integral part of the restraint performance.

Store this child car seat in a safe place when it is not being used. Avoid placing heavy objects on it.

Most accidents occur on short trips. so do not be tempted to avoid using the seat simply because you are not travelling very far.

Keep plastic bag away from your child as it could cause suffocation.

Do not expose the child seat to any corrosive substances. Use a wet towel to clean the plastic body of the child seat.

Make sure the child case seat belt is adjusted to a suitable position and ensure the belt is not twisted.

Please ensure the lap belt is worn low down across the pelvis.

Do not use this product second hand as you never know its history.

Children are safer when properly restrained in rear vehicle seating positions, rather than front seating positions, DO NOT use this child restraint on a passenger seat fitted with a frontal airbag. You can use your child car seat as illustrator.
Referred to the vehicle manufacturer's handbook for i-Size seat instructions.

When the airbag is activated, it cannot be used in the passenger seat.

Only for seats with three-point seat belts.

p. 6 in the PDF ↗

1.3 Product overview

  • 1 Headrest
  • 2 Small Headrest
  • 3 Internal cushion
  • 4 Buckle
  • 5 Crotch pad
  • 6 Central adjuster
  • 7 Adjuster strap
  • 8 Adult seat belts guide gap
  • 9 Shoulder belts
  • 10 Backrest Reclining Handle
  • 11 Rotation button
  • 12 ISOFIX button
  • 13 Headrest Handle
  • 14 Top Tether
  • 15 Child car seat
  • 16 ISOFIX Connector
p. 7 in the PDF ↗

Bucide latches

Red button

Metal plate

Adjusting handle

ISOFIX anchor

Guide socket

3-point vehicle belt

Diagonal belt section

Lap belt section

Vehicle seat buckle

p. 8 in the PDF ↗

2. Preparatory Work and Functions

2.1 Prepare ISOFIX

  1. If your car is not equipped with the ISOFIX guide socket, please insert the guide socket into the ISOFIX anchor.

TIP: ISOFIX anchors are located between the backrest and seat cushion.

  1. Press the ISOFIX button push rearward to the longest.

2.2 Prepare Top Tether

  1. Pull out the Top Tether and press the tether strap release button to extend the strap until it is long enough to connect it to the Top Tether anchorage point in the vehicle.
  1. If the Top Tether is tightened favorably and correctly, the button will change to green.

2.3 Adjust harness and headrest

2.3.1 Adjust harness and headrest in the 5-point harness installation(From 40 up to105 CM)

  1. Press down on the central adjuster and pull the shoulder belts towards you, (DO NOT pull on the shoulder pads ) release the 5-point harness as far as it will go.
  1. Pull upwards on the adjusting handle ,whilst pulling up or pushing down the headrest to the required position. Adjusting the height of the headrest will allow for the shoulder belts to be the same level as the child's shoulders.

2.3.2 Adjust headrest(From 100 up to 150 CM)

  1. Make sure the 5-point harness is removed.
  1. Make sure the seat cushion is removed.
p. 9 in the PDF ↗
  1. Press on the adjusting handle in the direction of the arrow to release the headrest, and then adjust the headrest up or down to the desired position. Upon release of this handle, the headrest will lock into place automatically.
  1. The headrest is in the correct position when the diagonal belt section of the 3-point vehicle belt sits on the child's shoulders and when you can fit 2 fingers between the Seat belt shoulder strap of the headrest and the shoulder of the child.

2.4 Use 360° rotation system

2.4.1 To rotate 180° in Rearward Facing

(From 40 up to 105CM Rearward Facing)

  1. Pull the rotation button outwards to release the child car seat, and then rotate the child car seat by 90°, at where the child car seat will lock into place automatically.
  1. To rotate it back to the rearward facing position: pull the rotation button outwards to release the child car seat, and then rotate the child car seat by 180° back to the rearward facing position, at where the child car seat will lock into place automatically.
  1. Ensure the child car seat is at the rearward facing position, and in fullest recline position.
  1. Double check the bottom support is.

2.4.2 To rotate 180° from Rearward Facing (From 40 up to 105 CM) to Forward Facing(From 76 up to 150 CM Forward Facing)

  1. Pull the rotation button outwards to release the child car seat, and then rotate the child car seat by 180° at where the child car seat will lock into place automatically.
  1. Adjust the recline position to the desired position if necessary. Ensure the child car seat is at the forward facing position, and the desired recline position.

2.4.3 Forward Facing( From 76 up to 150 CM)

  1. Pull the rotate button to push the child car seat, and then push the child car seat to one to five forward facing gears. After releasing the rotate button, the child car seat will lock in place automatically.
  1. Ensure the child car seat is at the forward facing position, and the desired recline position.
p. 10 in the PDF ↗

3. Installation

WARNING:

  • Do not use forward facing before the child's age exceeds 15 months.
  • If the vehicle is equipped with an active front seat airbag, DO NOT use the child seat in a rearward facing position.

3.1 Rearward Facing Installation

3.1.1 (40-105cm ,birth to approx. 15months) With

5-point harness+ ISOFIX + Top Tether.

  1. Prepare the ISOFIX.
  1. Ensure that the 5-point harness is correctly installed and ensure that the 5-point harness is correctly adjusted.
  1. Adjust the child car seat to the fullest recline position and make sure recline mechanism is securely locked.
  1. Rotate the child car seat ,to the rear of the vehicle against the direction of travel.
    Ensure that the child car seat is in the rearward facing position and the rotation mechanism is securely locked.
  1. Double check to make sure that the child car seat is in the fullest reclined position.
  1. Install the ISOFIX confirm that the indicator turns green.
    And unfold the bottom support.
  1. Push the child seat towards the backrest applying a firm, even pressure on both sides.
  1. Children between 40 and 75 cm need cushions to sit in seats, when it exceeds 75 cm, take off the seat cushion.

3.1.2 Securing your child with 5-point harness

  1. Press the red button to release the 5-point harness buckle and press on the central adjuster to pull out the shoulder belts.
    DO NOT pull on the shoulder pads.
p. 11 in the PDF ↗
  1. Place your child in the child car seat, and ensure that your child's back is lying flat against the backrest of the child car seat.
  1. Guide the two buckle latches together and insert them into the 5-point harness buckle. An audible "click" will be heard once the buckle is locked.
  1. Pull the adjuster strap towards you until the harness lies flat and is close against your child's body.

For your child's safety, ensure that the following checks are carried out before every journey:

  • The ISOFIX connectors are securely engaged in the anchors and the indicators are both completely green.
  • The child restraint is sat up against the backrest of the vehicle seat.
  • The 5-point harness is fitted snugly to the child. Make sure you can fit no more than one finger between the harness and the child's body, approximately 1 cm. If there is more space, tighten the harness further.
  • The straps are not twisted.
  • The shoulder straps sit in the correct position on the child's shoulders. Any lap strap must be worn low down, so that the pelvis is firmly engaged.
  • The 5-point harness buckle is properly secured.

3.1.3 Fix the Top Tether

  1. Prepare the Top Tether after your child is secured by 5-point harness with the rearward facing,
  1. Place the Top Tether strap through the gap between the headrest and the backrest, then connect the Top Tether anchorage. If the Top Tether is tightened favorably and correctly, the button will change to green.
p. 12 in the PDF ↗

3.2 Forward Facing Installation

3.2.1 (76-105cm, from approx. 15 months to 4 years)With 5-point harness+ISOFIX

+Top Tether

  1. Prepare the ISOFIX.
  1. Ensure that the 5-point harness is correctly installed.
  1. Ensure that the 5-point harness is correctly adjusted.
  1. Adjust the child car seat to the desired recline position and ensure that recline mechanism is securely locked.
  1. Ensure that the child car seat is in the forward facing position and the rotation mechanism is securely locked.
  1. Place the child restraint on the vehicle seat facing the front of the vehicle in the direction of travel.
  1. Install the ISOFIX confirm that the indicator turns green.
  1. Push the child car seat towards the backrest applying firm, even pressure on both sides.
  1. Secure your child in the child car seat with 5-point harness.
  1. Prepare the Top Tether after your child is secured by 5-point harness with the forward facing, follow the steps described in point 2.2.

For your child's safety, ensure that the following checks are carried out before every journey:

  • The ISOFIX connectors are securely engaged in the anchors and the indicators are both completely green.
  • The child restraint is sat up against the backrest of the vehicle seat.
  • The 5-point harness is fitted snugly to the child. Make sure you can fit no more than one finger between the harness and the child's body, approximately 1 cm. If there is more space, tighten the harness further.
  • The straps are not twisted.
  • The shoulder straps sit in the correct position on the child's shoulders.
  • Any lap strap must be worn low down, so that the pelvis is firmly engaged.
  • The 5-point harness buckle is properly secured.
p. 13 in the PDF ↗

3.2.2 (100-150cm, from 3 to 10 years)

Installation Forward Facing with two options :

  1. with 3-point vehicle belt
  2. with 3-point vehicle belt & ISOFIX
  1. Ensure that the 5-point harness has been removed correctly. (Refer to section 5)
  1. Ensure the pad has been removed
  1. Adjust the child car seat to the the required position and make sure recline mechanism is securely locked.
  1. Ensure that the child car seat is in the forward facing position and the rotation mechanism is securely locked.
  1. Place the child restraint on the vehicle seat facing the front of the vehicle in the direction of travel.
  1. Install the ISOFIX confirm that the indicator turns green. (Option 2)
  1. Push the child car seat towards the backrest applying firm, even pressure on both sides.

3.2.3 Securing your child wifh 3-point vehicle belt

  1. Place the child in the child car seat.
  1. Pull out the 3-point vehicle belt an far as possible and guide it around the front of the child, and secure the vehicle seat buckle, An audible"click"will be heard once the buckle is locked.
  1. Place the diagonal belt section and the lap belt section on the same side of the vehicle seat buckle, under the armrest and through the red belt guide gap of the child car seat.
  1. Place the lap belt section on the opposite side of the child car seat through the red belt guide gap.
  1. Ensure that the diagonal belt of the 3-point vehicle belt sits over the child' s collar bone and not in front of their neck.
p. 14 in the PDF ↗

TIP: If necessary, adjust the headrest to ensure that the seat belt Is sitting correctly on the child's shoulder.

For your child's safety, ensure that the following checks are carried out before every journey:

  • The ISOFIX connectors are securely engaged in the anchors and the indicators are both completely green.
  • The child car seat is sat up against the backrest of the vehicle seat.
  • The diagonal belt section of the 3-point vehicle belt and the lap belt section on the side of vehicle seat buckle are passed through the red belt guide gap.
  • The lap belt section on the opposite side to the vehicle seat buckle is passed through the red belt guide gap.
  • The diagonal belt of the vehicle seat belt sits over the child's collar bone and not in front of thelr neck.
  • Any lap strap must be worn low down, so that the pelvis is firmly engaged.
  • The 3-point vehicle belt is tight and not twisted at any point.

4. Removal of the Child Car Seat

4.1 ISOFIX

  1. Press the ISOFIX release buttons to release the ISOFIX connectors, push the ISOFIX connectors back into the base of the child restraint.
  1. Remove the child car seat from the vehicle seat.

4.2 3-point vehicle belt + ISOFIX

  1. Release the buckle tongue from the vehicle seat buckle. Unthread 3-point vehicle belt from the child car seat and allow it to retract.
  1. Press the ISOFIX release buttons to release the ISOFIX connectors, push the ISOFIX connectors back into the base of the child restraint.
  1. Remove the child car seat from the vehicle seat.
p. 15 in the PDF ↗

5. Removal and installation of the 5-point harness

5.1 Removal of the 5-point harness

  1. Press down on the central adjuster, and pull the shoulder straps towards you, extending the 5-point hamess as far as it will go. DO NOT pull on the shoulder pads.
  1. Pull the adjusting handle upwards, whilst pushing the headrest downwards to the position of suitable position.

Turn the child car seat around so that the rear is facing you.

  1. Open the rear cover board.
  1. Place the webbing loops of the shoulder straps over the joint plate.
  1. Cloes the rear cover board.

Turn the child car seat around so that the front is facing you.

  1. Pull out the shoulder belts and shoulder pads from the headrest slots in front of the headrest.
  1. Take out the shoulder belts from the buckle.
  1. Turn the metal plate to be vertical and remove from the housing, remove the 5-point harness buckle.

5.2 Installation of the 5-point harness

  1. Place the 5-point harness buckle into the crotch pad.
  1. Turn the metal plate of the 5-point harness buckle to be vertical and insert it into the housing.
  1. Guide the two buckle latches together and insert them into the 5-point harness buckle. An audible "click"will be heard once the buckle is locked.
p. 16 in the PDF ↗
  1. Pull the adjusting handle upwards, whilst pushing the headrest upwards until holes are aligned.
  1. Thread both of the shoulder belts through the shoulder pads.
  1. Thread the loops of both shoulder belts and shoulder pads through the headrest slots. The straps of the shoulder pads should be beneath the straps of shoulder belt.

Turn the child car seat around so that the rear is facing you.

  1. Open the rear cover board.
  1. Place the webbing loops of the shoulder straps over the joint plate.
  1. Cloes the rear cover board.

6. Care and Maintenance

6.1 Care for the 5-point harness buckle

Buckle failure can cause injury. DO NOT use oil or other lubricants on any part of the 5-point harness buckle. Buckle malfunctions are usually caused by a build-up of debris such as food crumbs or other small particles.

Signs of buckle malfunction as below:

  • The buckle latches are slow to release when the red release button is pressed.
  • The buckle latches will not lock into the buckle securely (i.e they are ejected again if you try to push them in).
  • The buckle latches engage without an audible "click".
  • The buckle latches are difficult to insert(you will feel resistance).
  • The buckle opens ONLY when extreme force is applied.

To wash the harness buckle so that it functions as required:

Step 1: Remove the 5-point harness buckle from the child car seat.

Step 2: Soak the 5-point harness buckle in warm water with mild washing-up liquid for at least an hour. Rinse and allow it to air dry thoroughly before attaching back onto the child car seat.