p. 1 in the PDF ↗

Warning

  • Must weight less than 15kg.
  • Always use the restraint system and adjust to fit snugly. The harness must always be used and correctly fitted. Most injuries from high chairs are cause by falls.
  • Seat pad is detachable and use without to create more space in the high chair.
  • DO NOT place your child on tray.
  • DO NOT adjust the height of the high chair with child in the seat.
  • Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
  • Always use the high chair on a flat, even surface. Do not elevate high chair on table or any structure.
  • Apply the wheel locks when not moving the high chair.
  • Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
  • TO avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fire places, and any other hot surfaces.
  • TO avoid strangulation, never place near a window with cords for blinds or drapes.
  • TO avoid injuries caused by falls or by access to dangerous items, position product away from solid structures, benches, furniture, walls, and electrical cords.
  • Prevent serious injury or death. Do not use this product in motor vehicles.
  • Never allow child to push away from table.
  • Never lift and carry child in the product.
  • Stay near and watch your child during use. Never leave the child unattended.
  • Keep children away when unfolding and folding this product to avoid injury.
  • DO NOT use this product if it is damaged, broken, torn, or has missing parts.
  • DO NOT use this product unless all components are correctly fitted and adjusted.
p. 2 in the PDF ↗

How to Switch to Rocking Chair / Swing Mode

  • As shown in figure 1, remove the tray, unlock it by pressing the button on the bottom of the seat, adjust the height to the lowest level.
  • As shown in figure 2, undo the hooks connecting the seat to the front steel tube legs and finally adjust the backrest (by pressing the button on the back of the seat).
  • Make sure to fasten the child to the 5-point safety belt before using.
    Back adjustment button
p. 3 in the PDF ↗

Accessories

Chair body

  1. Plate
  2. Eco-leather cover
  3. Safety belt
  4. Base frame
  5. Steel pipe leg
  6. Wheels
    Installation step:
  • Insert the steel pipe in the bracket.
  • Insert base frames into the seat frame. Make sure the curve side of each base frame is facing outside when installed. Press both button on left and right and then slide to open the high chair.
  • Press both button on left and right to adjust height.
  • Insert wheels and plate.
  • Become a baby high chair.
p. 4 in the PDF ↗

Seat adjustment

Back adjustment button
Height adjustable button

p. 5 in the PDF ↗

Foot Angle adjustment

As shown in the picture, Press both buttons to adjust footrest to original position.

How to fold

Press both buttons on left and right and then slide to folding the high chair.