p. 1 in the PDF ↗

BABY HIGH CHAIR

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

Please read the instruction of high chair carefully before using and keep it for future reference. It may cause injury to the infant if operating the high chair not according to the instruction!

p. 2 in the PDF ↗

Product Instructions

Product information
Model : Movio
Product Name: Multi-functional 2 in 1 high chair & Swing

  1. Seat structure
  2. Tray
  3. Eco-leather cover
  4. Function operation frame*2
  5. Base frame*2
  6. Safety belt
  7. Frame support tube*4
  8. Wheels*4
  9. Remote control+Adapter
p. 3 in the PDF ↗

Product Instructions

Warning!

Only adults are allowed to assemble the products, children should not be allowed. Be careful with pinching during installation/operation.
Noted: It is recommended to screw the nut halfway firstly, and then tighten all the nuts when all the parts are fixed.

Attach each of the four brackets to the two bases and insert the adjustable bracket.
When installing, make sure that the open and fold buttons are facing outward and that the snaps at the joints of each bracket are connected in place.

Outward-facing

Inward-facing

Assemble the seat with the fixed bracket.
Press the left and right adjustment buttons at the same time to slide open the high chair.

press down

p. 4 in the PDF ↗

Product Instructions

Press and hold the left and right buttons in concert to adjust the seat height.

Insert into a tray and put on the eco-leather cover, then finish the installation of a baby high chair.

p. 5 in the PDF ↗

Product Instructions

Height adjustment
Press the 2 buttons as the following arrow marked on each side to adjust the height.
Footrest adjustment
Press the 2 buttons as the following arrow marked on each side to adjust the 3 different positions.
WARNING: Checking all parts carefully before using the product, To ensure the installation properly, adjustable buttons correctly, and the high chair stable. If the products is unstable or has any damage or deformation, please stop using it. And keep the disassembled parts properly and keep away from children to prevent accidents.

p. 6 in the PDF ↗

Product Instructions

Based on the high chair mode, press the button at the bottom of the seat to change the high chair into swing mode as shown in the following figure.

Unlock the safty buckles which connected to the seat as showing in the figure

p. 7 in the PDF ↗

Product Instructions

There are 5 buttons on the armrest of the high chair, which can be operated according to different functions when connected to the charger.

① Time:15/30/45M
② Swing Speed
③ Next/Volume+
④ Power/Pause
⑤ Last/Volume-

It can be connected to your mobile bluetooth, Setting the bluetooth and find the YY018, Click to connect it successfully.

p. 8 in the PDF ↗

Precautions

  1. When using this product, be sure to use a seat belt!
  2. Do not leave unattended children alone in the product!
  3. The age range for using dining chairs is 12-36 months.
  4. Suitable age range for using rocking chairs: 0-12 months.
  5. The weight of children using rocking chairs cannot exceed 9KG
  6. The weight of children using dining chairs cannot exceed 15KG
  7. It is prohibited to use toy sticks to lift or move dining chairs.
  8. When children are inside this product, do not adjust the function or lift or move the product!
  9. This product is strictly prohibited from being placed at a height for use (such as on countertops, tables, stairs, or other high ground positions) to prevent the risk of falling!
  10. Placing this product on a non flat surface is very dangerous!
  11. Pay attention to the risk of suffocation: Please do not use on soft objects to prevent suffocation when knocked over (such as beds, sofas, etc.)
  12. Please do not allow children to stand in multifunctional dining chairs. To prevent potential accidents such as falling and being entangled or strangled by seat belts.
  13. Don't let children use this product as a toy!
  14. It should be ensured that children can only fold this product after leaving it!
  15. Please do not use this dining chair until all parts are properly assembled and adjusted.
  16. Stay away from sources of fire and other strong heat sources. (For example, electric heaters, gas heaters, etc. near high dining chairs.)
  17. Do not hang any items on the dining chair to avoid affecting its stability.
  18. After connecting the power or pressing the power switch, this product must wait for 3-5 seconds for other function buttons to start working.
  19. The wires, plugs, accessories, and other parts of the baby rocking chair adapter need to be checked regularly, 1112.
  20. Once the above components are damaged, please do not continue to use them.
  21. Only the matching adapter can be used for the baby rocking chair.
  22. This product is not intended for children to sleep with.
  23. This product is not equivalent to a bed. If a child falls asleep, they should be carried back to the bed!
p. 9 in the PDF ↗

Probable problems & Solutions

NO.Probable problemsSolutions
1Suddenly stop when swinging and playing musicBatteries are not be assembled correctly and electricity is not enough
2No functions after startingCheck whether polarity of batteries are in correct position
3Long time no usTake the batteries out
4Shake seriouslyCheck the folding joint open completely or not
5Indicator light become weakElectricity of batteries is not enough
6No/ small sound after connecting APPCheck whether the Bluetooth connection is successful, volume is in a minimum state, signal distance is within the range.
7Motor lifespan shortenThe swing rocking function must be closed when swing convert into high chair.

Maintenance and cleaning

  1. Seat cushion: Remove the seat cushion; Assembled intact; Use cold water for gentle machine wash or hand wash.
  2. Toy racks and toys: Use a damp cloth dipped in flexible soap to scrub and air dry, please do not use water bubbles to wash.
  3. Support frame: Please wipe with a clean damp cloth dipped in flexible soap.
  4. Cover: eco-leather.
  5. Inner filler: fire-resistant hard resin cotton.
    Warning! Prohibit bleaching, dehydration, and drying.

WARNING!

Never machine-wash, bleach, dehydrate the products!

  1. Clean the metal parts: use warm water to add a mild detergent to wipe, dry them to prevent rust.
  2. Clean seat cover: wipe with a mild detergent, then rinse with warm water.
  3. Keep it away from rain or near water and a very hot or dusty environment, or it is easy to damage the circuit board.
  4. Excessive exposure or strong heat will make the plastic parts aging, cloth fade.
  5. Please do not put other things on the product when in storage.
  6. Stage to check whether the product has a screw loose, parts aging, material and sewing rupture phenomena.
  7. When the parts are damaged, please stop using or replacing the parts.