p. 1 in the PDF ↗

i-Size universal ISOFIX
76-105 cm
i-Size Booster seat
100-150 cm

p. 5 in the PDF ↗
  • Be referred to the vehicle manufacturer's handbook for the use of an "i-size Enhanced child Restraint System".
  • The child restraint may not fit in all approved vehicles when used in stature range above 135 cm.

WARNING

IMPORTANT-DO NOT USE BEFORE THE CHILD'S AGE EXCEEDS 15 MONTHS(Refer to instruction)

ATTENTION:

Notice regarding i-Size category Enhanced Child Restraint Systems(76-105cm).
This is an i-Size Enhanced Child Restraint System.
It is approved according to UN Regulation No.129 ,for use in, i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users' manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

Notice regarding i-Size booster seat category Enhanced Child Restraint Systems(100- 150cm)
This is a i-Size booster seat Enhanced Child Restraint System.
Tit is approved according to UN Regulation No.129, for use primarily in " i-Size seating positions as indicated by vehicle manufacturers in the vehicle user's manual.
Tif in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

p. 6 in the PDF ↗

Use in the vehicle

  1. Product description:
DIRECTIONGROUPINSTALLATION METHODTYPE
Forward facing76-105ISOFIX+Top TetherI-Size
Forward facing105-150ISOFIX+ 3 point car beltI-Size booster seat
Forward facing105-1503 point car beltI-Size booster seat

2. Certification

...as a child safety seat installed in a vehicle

Velano | Tested and certified according to ECE R129

StatureForwardForward
FLEXO76-105cm100-150cm

* ECE= European Standard for Safety Equipment
The child safety seat has been designed, tested and certified according to the requirements of the European Standard for Child Safety Equipment(ECE R129/03).

p. 7 in the PDF ↗

WARNING

Never use this child restraint system in seating positions where an active frontal airbag is installed.

An active frontal airbag may cause death or seriously injury of your child in an accident.

Please read the instructions carefully and keep safely for future reference.
There is an instructions compartment in the back of the child car seat for storage of the instructions manual.

AIRBAG

You can use your child car seat as follows:

p. 8 in the PDF ↗

Know your child seat

01- Headrest
02- Shoulder strap belt guide
03- Backrest
04- Chest pad
05- Comfortable Cushion
(Suitable for 76-87cm)
06- Shoulder strap
07- Buckle
08- Crotch strap
09- Adjuster
10- Harness adjuster strap

p. 9 in the PDF ↗

11- Headrest adjustable switch
12- Top tether
13- Pulling regulator
14- Isofix top-tether connector
15- Lab belt guide
16- Isofix unlock button
17- Isofix connector

p. 10 in the PDF ↗

Setting the shoulder belt height

Check whether the shoulder belts are set at the right height for your child.

The shoulder belts should be fed into the belt slots that lie at shoulder height or just above.

p. 11 in the PDF ↗

Step1.

Step2.

Step1. Loosen the harness .Press the adjuster button to release the harness with one hand, use another hand to pull out the shoulder straps outward.

Step2. Pull the headrest switch button upward and down ward to adjust the height of the harness and the headrest according to the child's height.

p. 12 in the PDF ↗

Using the buckle

Locking Method

Unlocking Method

Locking Method :

Align the left and right buckle tongues to one tongue and insert into the buckle until you hear a"Click".

Unlocking Method:

You can press the red button of the buckle downwards, the two metal sections will be pop up.

p. 13 in the PDF ↗

Adjust the harness

Loosening the shoulder harness harness

Tightening the harness

Loosening the shoulder harness

Press the adjuster button under the cover and at the same time pull both shoulder straps forward.

Tightening the harness

Pull the adjuster strap until the harness is fully tightened.

p. 14 in the PDF ↗

How to use the isofix connector

In order to lock the isofix connector to the anchorage points successfully, you can ues isofix insertion guides.

Locate the ISOFIX Anchorage points and place the isofix insertion guides over the two points.

Extend the ISOFIX Brackets and connect them to the Anchorage Points of the vehicle.

p. 15 in the PDF ↗

Forward facing installation(76-105cm)

Suitable for child's height form 76-105cm

Press both isofix unlock button and push out isofix connector.

Find the vehicle isofix anchor, make sure the isofix connector attached the anchor correctly, meanwhile push the seat until you hear"CLICK"

Notice:Check the isofix unlock button if it shows green, make sure that installed firmly.(Green means locked correctly, Red means unlocked or not locked )

p. 16 in the PDF ↗

Push the child seat backrest until attached the vehicle backrest tightly.

Adjust the length of the top tether to the most suitable position

Connect top tether with the fixing point on the car.

p. 17 in the PDF ↗

String the belt of top tether until the pulling regulator shows green.

Release the buckle.

Put the child into the safety car seat, align the left and right buckle tongues to one tongue and insert into the buckle until you hear a "click".

p. 18 in the PDF ↗

Forward facing installation(100-150cm)

It is suitable for the height 100-150cm, given to children about 3-12 years old.

Hide the comfortable cushion and 5 point harness.

Installation method of child car seat.

Notice: When use as height 100-150cm, this seat can be installed by isofix+adult safety belt or only by adult safety belt.

p. 19 in the PDF ↗

Removing 5-Point Harness and Storage the Accessory Part

A. Open the flap on the back of the seat and stow the shoulder sections of the harness behind.

B. To store the 5-point safety harness away it needs to be fully loosened first. Press the red release button and undo the harness. Lift the cover under the cushion and store the buckle parts in the compartment.

p. 20 in the PDF ↗

Method 1: Installation adult safety belt(100-150cm)

Hide the isofix in the booster.
Put the seat against the car seat

Follow the routine to install the baby car seat.

p. 21 in the PDF ↗

Securing the child

Put the child into the child car seat and follow routine.
Use the Headrest adjustable switch to adjust the height of the headrest according to the child's height.
The shoulder straps should be level with or just above the child s shoulders.
Fasten car seat belt and make sure, it is tigh t enough.

p. 22 in the PDF ↗

Method 2: Isofix attachments+adult safety belt(100-150cm)

Locate the ISOFIX Anchorage poin ts and place the isofix insertion guides over the two points.

Extend the ISOFIX Brackets and connect them to the Anchorage Points of the vehicle.

p. 23 in the PDF ↗

Securing the child

Put the child into the child car seat and follow routine.
Use the Headrest adjustable switch to adjust the height of the headrest according to the child s height.
The shoulder straps should be level with or just above the child s shoulders.
Fasten car seat belt and make sure, it is tigh t enough.

p. 24 in the PDF ↗

Unlock ISOFIX

Press the isofix unlock button to release the isofix connector and take away the seat.

p. 25 in the PDF ↗

Remove the cover

Adjust the headrest up to most highest position, take away the comfortable cushion. Then release the buckle to remove the chest pad.
Romove the headrest cover and seat cover carefully.

p. 26 in the PDF ↗

Maintenance

1. Washing

  • The covers and the shoulder pads can be removed for washing under 30 clean water;
  • Clean the shell using a damp cloth.
  • Clean the buckle using a damp cloth.
  • Remove off the harness system before washing by soap water.

2. Safety Self-Checking

  • Checking harness system on time to make sure the safety, once find the broken, please contact manufacturer.
  • If you have trouble on installation, please contact manufacturer.
  • Checking car belt on time to make sure the safety, once find the broken, please contact manufacturer.

3. Handle after accident

After colliding by accident, please change baby car seat. Or contact manufacturer.